John-wood Noritz N-069M-DV User Manual download pdf (Page 18)

1. Close the gas valve.

2. (1) Turn the power on.

(2) Turn and leave open the hot water fixture for more than 1 minute and close.

*If multiple units are being used, drain one minute for each unit.

*An 11 Error Code may appear on the remote control.

This is not a malfunction of the unit. Do not turn Power ON/OFF Button OFF.

3. Close the water supply valve, disconnect

the electrical power supplied to the unit.

4. Fully open all hot water fixtures.

5. Open all drain plugs and drain the water out

of the unit.

6. When the water is completely drained, replace all drain

plugs and close the hot water fixtures.

If the water heater will not be used for a long period of time,

Drain the water.

Drain the water as follows:

To avoid burns, wait until the equipment cools down

before draining the water. The appliance will remain hot

after it is turned off.

High Temperature

Drain water into a bucket to prevent water damage.

Caution

Do not touch with wet hands.

Drain Plugs

Fixture

Turning the Unit Back On

1. Check that all drain plugs are inserted.

2. Check that all hot water fixtures are closed.

3. Follow the procedure on p.11 “Initial operation”, steps 1 through 4.

Preventing Damage from Freezing-2

SAR8192-2_014_026_E_J.p65 05.11.29, 9:00 PMPage 18 Adobe PageMaker 6.5J/PPC

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 75 76

No comments

John-wood Noritz N-069M-DV User Manual Page 18