John-wood Noritz N-069M-DV User Manual download pdf (Page 57)

Connecting Quick Connect Cord

The wire coloring on the Quick Connect Cord will

not be the same as the wire coloring from the

connection plug inside the unit.

* The remote controller can be connected to either

unit A or B.

Caution

For Quick Connect Multi System Installation

use a Quick Connect Cord (Sold Separately).

Quick Connect

Cord

"Quick Connect Cord" tag

1.Red

2.Black

3.White

4.Green

5.Blue

6.Blue

1.Red

2.Black

3.White

4.Green

5.Blue

6.Blue

1.Red

2.Black

3.White

4.Green

5.Blue

6.Blue

1.White

2.Green

3.Red

4.Black

5.Blue

6.Blue

Instruction for connecting the Quick Connect

Cord to each unit:

1. Turn off the power.

2. Remove the front cover of the heater (4 screws).

3. Pass the Quick Connect Cord through the wiring

throughway and into the unit.

4. Plug the connector on the Quick Connect Cord to

the receptacle inside the unit.

5. Attach the ground wire of the Quick Connect Cord

to the terminal block fixing plate.

(If the ground wire is not attached, electrical noise

may cause problems)

6. Secure the coupling cord with a clamp.

7. Replace the front cover.

Wiring Throughway

Coupling Cord

Clamp

Ground wire

Connector

Junction Box

SAR8192-2_046_057_E_J.p65 05.11.29, 9:01 PMPage 57 Adobe PageMaker 6.5J/PPC

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Comments to this Manuals

No comments

John-wood Noritz N-069M-DV User Manual Page 57

Comments to this Manuals

Related products and manuals for Water boiler John-wood Noritz N-069M-DV